AI Apartment Building Design: Plans, 3D, MEP
Write what you want to build: storeys, plot size, apartments per floor, lifts, penthouses. The studio turns the description into a complete residential building with exact dimensions, raises it floor by floor in 3D, then routes its building services: water, sewage, electricity, gas, air-conditioning and ventilation.
How it works
- Describe the building In English or Hebrew, in your own words, or start from an example: an 8-storey corner building, a small 4-storey block or a 15-storey tower.
- Check what we understood Storeys, plot width and depth, apartments per floor, bedroom mix, penthouses, lifts and floor heights. A value you did not write is marked as an assumption and can be changed.
- Watch it built The ground floor, the first typical floor, the other floors, the penthouse and the roof rise one after another, with a plan of every level and the area of every room.
- Add the systems Water supply, sewage, electricity, gas, air-conditioning and ventilation are built one by one in a spiral, with the flow direction shown on every pipe and duct.
What you get
- A floor plan of every level, with the name and area of every room
- A 3D model of the building on its street, with real window openings, glass railings and a roof terrace
- Risers, mains and branches of six building systems, from the street connection to every apartment
- The length of each system and the number of points it serves
- The building in the 2D editor: walls and rooms to edit, elevations, sections, system plans, quantities and a cost estimate
- An AI render of the finished building in the AI Studio
Questions
Is the building studio free?
Yes. Describing the building, the 3D build and the systems are free and need no account. Opening the building in the 2D editor needs a free account; AI renders use credits.
How accurate are the dimensions?
The building is drawn in millimetres from the plot size and floor heights you give, and every room area is calculated from its outline. It is a concept design: a permit or construction set still needs an architect and engineers.
Which systems does it plan?
Water supply, sewage, electricity, gas, air-conditioning and ventilation. The routes are schematic: they show where risers, mains and branches run, not pipe sizes or code checks.
What kind of buildings can it design?
Residential buildings of 2 to 30 storeys on a rectangular plot, with 1 to 12 apartments per floor around a central core with a stair and 1 to 4 lifts, ground-floor uses such as a lobby, café or shop, and penthouses set back on the top floor.
Can I change the building after it is built?
Yes. Change the values and build again, or open the building in the 2D editor, where every wall and room can be edited and the drawings, quantities, 3D editor and AI render are ready to use.